Manufacturing

 
Every Stacker EXTREME BOOTH ™ is built to order and assembled by skilled craftsmen in our Carrollton, Texas Production Facility. Our photo booths are designed using commercial grade yet lightweight ABS material constructed over 3/8″ plywood. We use heavy duty black hardware for a clean sleek look and premium wheel casters that can withstand years of high traffic use. Our photo booths are made not only for portability but strength and durability! Before each booth is shipped it is thoroughly tested, this includes the booth structure and all of the electronic components and software if included.
 

Construction Gallery

 

 
Each of our Stacker Booth cases are equipped with the following hardware and components:
Original Case and Table Rear View

Booth Case

 
Our photo booths are designed using a lightweight black ABS construction over 3/8? plywood and heavy duty black hardware and premium wheel casters. Our photo booths are made not only for portability but strength and durability! We do have additional ABS colors available for custom orders.

Prop Box & Equipment Transport Case

 
The lower booth case was designed with a dual purpose, the custom cut hard foam insert is designed to accommodate the booth equipment (not printer) while in transport. Once you’re on location, remove the foam insert and you can display your props during the event. It’s one of our favorite and most popular feature on our Stacker EXTREME BOOTH™ case designs!
Prop Box & Equipment Transport Case
Prop Table

Prop Table

 
The top booth case front transport cover protects your booths electronic components while idle and during transport, when removed it becomes a 4’ table! Great for displaying your photo booth props and advertisement material. You can even eliminate the lower case prop box and set the top photo booth case on your table!

Case Locks

 
The top booth case and lower booth prop box case are both equipped with a “slam latch” locking device and include (2) keys to help secure your equipment and props while on-location.
Case Locks
Monitor Opening

Monitor Opening

 
The top booth case has a monitor opening that features a sleek design clean trimmed opening that accommodates a 20″ touch screen monitor.

Printer Opening and Insert Panel

 
The Original Stacker EXTREME BOOTH ™ top case is equipped with (1) printer panel that is specially designed for your printer. The guests will only have access to the paper tray and not the control panel of the printer. If you are purchasing the Original Stacker EXTREME BOOTH ™ case only, be sure to let us know which printer you will be using so that we can ship the appropriate printer panel for your photo booth printer. (Please note, the Mini 3.0 booth only accommodates the DNP DS40 Printer and includes (1) printer panel.)
Printer Opening and Insert Panel
Transport Handles

Transport Handles

 
The top booth case will include (2) removable transport handle panels that have a slam latch lock mechanism and will take the place of your printer panels when your booth is in transport. You can choose which side to setup the printer by removing that side transport handle and replacing it with the printer insert panel

Camera Mounting

 
The top booth case has a camera lens opening of 3″ and a custom camera mounting brackets that will accommodate any professional DSLR camera you choose. It has the ability to tilt forward and back, move back and forth and allow the camera to move side to side.
Camera Mounting
Strobe Light Mount

Strobe Light Mounting

 
The top booth case is equipped with a studio light box that features a white translucent Plexiglas diffuser and a 1/4″ spigot mounting bracket that will accommodate almost any professional photography strobe.

Exterior Power Supply

 
The top booth case features a built-in external power chassis plug located on the back rear side along with a 6′ power cable.
Exterior Power Chassis
Internal Power Supply

Internal Power Supply

 
The interior of the top booth case is equipped with a built-in 6 way plug.

Photo Booth Graphics

 
All Stacker EXTREME BOOTH™ come with standard “Photo Booth” graphic designs artwork. The graphics are printed directly onto the ABS material during the manufacturing of each booth. This is not a wrap or vinyl lettering. Images shown are standard graphics however, you can create your own custom graphics for an additional fee.
Standard Graphic

Customize Your Photo Booth

 
The Stacker EXTREME BOOTHS™ come with standard “Photo Booth” text graphics however, why not create your own unique branding for the top case of your photo booth!  All graphics are printed directly onto the ABS material during the manufacturing of each booth. This is not a wrap or vinyl lettering.  You can create the design layout (measurements provided) or let us create the design layout for you.  Your custom branding can include just your logo on all 3 sides of the top case or fill all 3 panels with 4-color process/full bleed graphics…your booth, your choice!  Call us for a custom branding quote today!

Side Note: The marquee curtain enclosure can also be custom branded on all 3 side panels.  Ask for details.

 

Your browser is out of date. It has security vulnerabilities and may not display all features on this site and other sites.

Please update your browser using one of modern browsers (Google Chrome, Opera, Firefox, IE 10).

X